Compare Products

Hide

Clear All

VS

Picture

RG-N18010-E High-density Large-buffer Core Switch for Cloud Architecture Network

Fit for data centers, MANs, campus networks, and scenarios with data centers and campus networks

Models

Series

Highlight Features

  • Clos orthogonal architecture, delivering non-blocking forwarding and high-speed transmission without packet loss
  • RGOS, a fully-decoupled modular operating system, providing independent components and nonstop services
  • Multiple hardware-level protection, offering carrier-class reliability and ensuring continuous operation without downtime
  • Fan connections in in-line mode and innovative Y-shaped airflow, improving heat dissipation efficiency and enhancing system reliability
  • Support for SDN, achieving raid deployment and automated O&M for campus networks
  • Fit for new SOE solution and innovative hyper-converged ports, allowing flexible networking

RG-N18010-E
High-density Core Switch for Cloud Architecture Network

Up to 52 x 10GE ports and 12 x 100GE ports per line card, and up to 416 x 10GE ports and 96 x 100GE ports per switch
Fit for data centers, MANs, campus networks, and scenarios with data centers and campus networks

Front Panel

Rear Panel

Eight line card slots,
supporting at most eight line cards
Line cards for your reference:
M18000E-8SFX
8 x SFX 10GE ports
(CWDM line card for core switches, applicable to SOE solution 3.0)
M18000E-8SFG
8 x SFG GE ports
(CWDM line card for core switches, applicable to SOE solution 3.0)
M18000E-HCA
Large-capacity carrier card for authentication, supporting two DNMX interface cards
20 x 10GE optical ports
4 x 100GE optical ports

Clos Architecture, Delivering Non-Blocking Forwarding and High-Speed Transmission Without Packet Loss

All line cards and switch fabric modules adopt the orthogonal architecture. Cross-line card traffic is transmitted to switch fabric modules through orthogonal connectors, with low transmission loss. This greatly reduces signal attenuation and improves service traffic transmission efficiency.

RGOS, a Fully-Decoupled Modular OS, Providing Independent Components and Nonstop Services

Completely decoupled service components, allowing automatic recovery upon component failures and ensuring high availability of the system
Live upgrade of service component functions, ensuring uninterrupted network for online function expansion

High availability High availability
Fault elimination in seconds Fault elimination in seconds
Hot patch upgrade Hot patch upgrade
Low CPU usage Low CPU usage

Multiple Hardware Protection, Offering Carrier-class Reliability and Ensuring Continuous Operation Without Downtime

Hardware-level Dual Redundancy

Faulty Optical Port Isolation

Dual-boot at the hardware level
Two flash chips used to store boot software to achieve hardware-level boot redundancy, avoiding switch boot failures due to flash chip faults

Fan Connections in In-line Mode and Y-Shaped Airflow, Improving Heat Dissipation and Enhancing System Reliability

Compared with the conventional single fan, fans connected in in-line mode improve the performance by 50% and provide better airflow. Y-shaped airflow design with front and right air inlets and rear air outlets forms a three-dimensional heat dissipation channel, improving heat dissipation efficiency. The airflow of line cards and switch fabric modules is separated from each other, enhancing system reliability.

Supporting SDN, Providing Rapid Deployment and Automated O&M for Campus Networks

Lightweight access control with one-click approval, allowing fast and secure terminal access
Policy migration in the case of terminal mobility, improving network access efficiency
Visual display of network traffic, allowing fast fault location, and realizing rapid production network recovery through automated O&M
Customized exclusive virtual network, allowing networks to support services efficiently through flexible resource adjustment
One-click approval One-click approval
Policy migration Policy migration
Visualization Visualization
Virtualization Virtualization

FAQ

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Documents

Specifications

Hardware Specifications

Hardware Specifications

N18010-E

N18014-E

Interface Specifications

Power module

4

4

Fan module

2

2

Fixed management port

1 x MGMT port, 1 x console port, and 1 x USB port

Supervisor module slot

2

2

Line card slot

8

12

Switch fabric module slot

4

4

System Specifications

Packet forwarding rate

14,200 Mpps

21,000 Mpps

System switching capacity

19.2 Tbps

28.8 Tbps

Number of MAC address

 Number of static MAC addresses

XA card: 4,000

XB card: 10,000

 Number of global MAC addresses

XA card: 96,000

XB card: 256,000

ARP table size

XA card: 40,000

XB card: 96,000

Number of IPv4 unicast routes

XA card: 64,000 (shared with IPv6 routes)

XB card: 350,000 (shared with IPv6 routes)

Number of IPv4 multicast routes

XA card: 4,000

XB card: 4,000

Number of IPv6 unicast routes

XA card: 15,000 (≤ 64 bytes, shared with IPv4 routes)

XB card: 65,000

Number of IPv6 multicast routes

XA card: 2,000

XB card: 2,000)

Number of ACEs

 XA card:

Ingress: 7,000

Egress: 1,500

 XA card:

Ingress: 28,000

Egress: 4,000

Number of VSU members

2

2

Dimensions and Weight

Dimensions (W x D x H)

442.5 x 560 x 442 mm (17.42 in. x 22.05 in. x 17.40 in.), 10 RU

482.6 x 570.7 x 605.1 mm (19.00 in. x 22. 47 in. x 23.82 in.), 14 RU

Weight (empty chassis and fan modules)

43.6 kg (96.12 lbs)

68.3 kg (150.58 lbs)

CPU and Storage

CPU

Supervisor module:

M18000E-CM : 2.2 GHz quad-core processor

Line card:

XA/XB/FE card: 2.2 GHz quad-core processor

Supervisor module:

M18000E-CM : 2.2 GHz quad-core processor

Line card:

XA/XB/FE card: 2.2 GHz quad-core processor

Storage

Supervisor module and line card:

Flash memory: 8 GB

SDRAM: DDR4 4 GB

Power and Consumption

Maximum power consumption

M18000E-CM: 60 W

M18000E-48GT4XS-XA: 85 W

M18000E-48SFP4XS-XA: 117 W

M18000E-24GT8SFP8XS-XA: 95 W

M18000E-32XS-XB: 149 W

M18000E-52XS-XB: 250 W

M18000E-12CQ-XB:240 W

M18010E-FE-X I: 50 W

M18000E-FE-X II: 160 W

M10C-FAN: 216 W

M18000E-CM: 60 W

M18000E-48GT4XS-XA: 85 W

M18000E-48SFP4XS-XA: 117 W

M18000E-24GT8SFP8XS-XA: 95 W

M18000E-32XS-XB: 149 W

M18000E-52XS-XB: 250 W

M18000E-12CQ-XB: 240 W

M18010E-FE-X I: 50 W

M18000E-FE-X II: 160 W

M14FAN-F: 360 W

Maximum output power

RG-PA600I: 600 W

RG-PD600I: 600 W

RG-PA1600I:

  90 to 180 V AC; 1,200 W

 180 to 264 V AC; power: 1,600 W

RG-PD1600I: 1,400 W

Rated input voltage

 RG-PA600I: 100–120 V, 200–240 V, 50/60 Hz

 RG-PD600I: –48 V DC

 RG-PA1600I: 100–120V, 200–240 V, 50/60 Hz

 RG-PD1600I: –48 V DC

Maximum input voltage

 RG-PA600I: 90–264 V, 47–63 Hz

 RG-PD600I: –40 V DC to –75 V DC

 RG-PA1600I: 90–264 V, 47–63 Hz

 RG-PD1600I: –40 V DC to –75 V DC

Environment and Reliability

MTBF

≥ 200,000 hours

Primary airflow

Line card: Side-to-rear airflow

Supervisor module/FE: Front-to-rear airflow

Line card: Side-to-rear airflow

Supervisor module/FE: Front-to-rear airflow

Operating temperature

0°C to 50°C (37°F to 122°F)

Storage temperature

–40°C to +70°C (–40°F to +158°F)

Operating humidity

10% to 90% RH (non-condensing)

Storage humidity

5% to 95% RH (non-condensing)

Operating noise

55.9 dB at the temperature of 35°C (95°F)

73.4 dB at the temperature of 50°C (122°F)

55.9 dB at the temperature of 35°C (95°F)

73.4 dB at the temperature of 50°C (122°F)

Interface surge protection

Power port: 6 kV

Telecom port: 4 kV (MGMT port)

Power port: 6 kV

Telecom port: 4 kV (MGMT port)

Operating altitude

–500 m to +5,000 m (–1640.42 ft. to +16404.20 ft.)


S
oftware Specifications

RG-N18000-E Series

Feature

Description

Ethernet Switching

Jumbo frame (maximum length: 9,216 bytes)

IEEE 802.3az EEE

IEEE 802.1Q (supporting 4K VLANs)

Voice VLAN

Super-VLAN and private VLAN

MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment

GVRP

Basic QinQ and selective QinQ

STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

ERPS (G.8032)

LLDP/LLDP-MED

IP Service

Static and dynamic ARP

DHCP client

DHCP relay

DHCP server

DHCP snooping

DNS

DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping

Neighbor Discovery (ND) and ND snooping

IPv4 and IPv6 GRE tunnel

IPv6 manual tunnel, IPv6 automatic tunnel, and IPv6 ISATAP tunnel

IP Routing

Static routing

RIP and RIPng

OSPFv2 and OSPFv3

GR

IS-ISv4 and IS-ISv6

BGP4 and BGP4+

IPv4/IPv6 VRF

IPv4/IPv6 PBR

Multicast

IGMPv1/v2/v3

IGMPv1/v2 snooping

IGMP proxy

IGMP fast leave

PIM-DM, PIM-SM, PIM-SSM, and other multicast routing protocols

Multicast static routing

PIM-SM, PIM-SSM, PIM-SMv6, and PIM-SSMv6

MSDP for inter-domain multicast

MLDv1/v2

MLDv1 snooping

Multicast source IP address check

Multicast source port check

Validity check of IGMP packets

Multicast querier

MPLS

MPLS L3VPN

MPLS 6VPE and MPLS 6PE

MPLS IPv6

MPLS MIB (RFC 1273, 4265, 4382)

ACL and QoS

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL80 and IPv6 ACL

Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL redirection

Port traffic identification

Port traffic rate limiting

IEEE 802.1p

Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences

Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, SP+WFR, and SP+WFQ

Congestion avoidance: tail drop, RED, and WRED

Rate limiting based on the inbound or outbound interface

Eight queues on each port

Security

Multi-AAA

RADIUS authentication, authorization, and accounting

TACACS+

IEEE 802.1X

IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication

Web authentication

Hypertext Transfer Protocol Secure (HTTPS)

SSHv1 and SSHv2

Global IP-MAC binding

ICMP (discarding ICMP packets of which the rate exceeds the threshold on an interface)

Port security

IP source guard

SAVI

ARP spoofing prevention

CPP and NFPP

Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types

Loose and strict RPF

uRPF ignoring default routes

Reliability

REUP

Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control

Data Link Detection Protocol (DLDP)

IPv4/IPv6 ECMP

IPv4 VRRP v2/v3 and IPv6 VRRP v3

BFD

Link monitoring, fault notification, and remote loopback based on 802.3ah (EFM)

1+1 redundancy for supervisor modules

N+M redundancy for power modules

Hot patching for online patch upgrade

GR for OSPF/IS-IS/BGP

BFD for VRRP/OSPF/BGP4/IS-IS/IS-ISv6/static routing

Hot swapping of supervisor modules, switch fabric modules, power modules, and fan modules

Device Virtualization

VSU

NMS and Maintenance

SPAN, RSPAN, and ERSPAN

sFlow (network detection technology based on packet sampling, which is mainly used for traffic statistics and analysis in heavy-traffic scenarios)

N:1 mirroring, 1:N mirroring, and flow-based mirroring

VLAN mirroring

NTP and SNTP

FTP, SFTP, TFTP, and Xmodem

SNMP v1/v2/c3

RMON (1, 2, 3, 9)

Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups

RMON used to implement Ethernet statistics, historical statistics, and alarm functions

NETCONF

CWMP

gRPC

OpenFlow Special 1.3

Flow table analysis defined by all protocols

Transmission of specified packets to the controller

Configuring the controller's IP address and port

Notifying port status changes to the controller

Web-based NMS

VXLAN

EVPN VXLAN tunnel establishment

LAN access to VXLAN

IPv4 over IPv4

Distributed gateway

IPv6 over IPv6

Using an SVI to connect to the VXLAN network

Using a routed interface to connect to the VXLAN network

Proxy ARP (replying with the actual MAC address))

ND proxy (replying with the actual MAC address)

ND reply (replying with the actual MAC address)

VXLAN static route

Anycast gateway

VXLAN bridging mode

VXLAN routing mode

Proxy ARP (replying with the gateway MAC address)

Configuring the UDP port number in VXLAN packets

Static VXLAN tunnel creation

Layer 2 VXLAN bridge

Layer 3 VXLAN gateway

EVPN VXLAN

Note: The item marked with the asterisk (*) will be available in the future.

Order Information

Chassis and Supervisor Modules

Model

Description

RG-N18010-E

RG-N18010-E chassis, eight line cards, two supervisor modules, and four SFUs

RG-N18014-E

RG-N18014-E chassis, 12 line cards, two supervisor modules, and four SFUs

M18000E-CM

RG-N18000-E high-performance supervisor module

M18000E-CM II

RG-N18000-E 2nd high-performance supervisor module


Power Modules and Fan Modules

Model

Description

RG-PA600I

RG-N18000-E power module (redundancy, AC, 600 W, 10 A)

RG-PD600I

RG-N18000-E power module (redundancy, DC, 600 W, 20 A)

RG-PA1600I

RG-N18000-E power module (redundancy, AC, 1600 W, 16 A)

RG-PD1600I

RG-N18000-E power module (redundancy, DC, 1400 W, 50 A)


S
FUs

Model

Description

M18010E-FE-X I

RG-N18010-E first-generation SFU

M18000E-FE-X II

RG-N18000-E second-generation SFU


L
ine Cards

Model

Description

M18000E-32XS-XB

32 x 10GE optical ports (SFP+, LC)

M18000E-52XS-XB

52 x 10GE optical ports (SFP+, LC)

M18000E-12CQ-XB

12 x 100GE optical ports (QSFP28, LC/MPO)

M18000E-24GT8SFP8XS-XA

24 x GE electrical ports (RJ45) + 8 x GE optical ports (SFP, LC) + 8 x 10GE optical ports (SFP+, LC)

M18000E-48GT4XS-XA

48 x GE electrical ports (RJ45) + 4 x 10GE optical ports (SFP+, LC)

M18000E-48SFP4XS-XA

48 x GE optical ports (SFP, LC) + 4 x 10GE optical ports (SFP+, LC)  

M18000E-8SFX

CWDM line card for 18000E series core switches, providing 8 x 10GE SFX ports.
The ports are backward compatible with a data rate of 1000 Mbps.

M18000E-8SFG

CWDM line card for 18000E series core switches, providing 8 x GE SFG ports

M18000E-HCA

High-capacity line card for centralized authentication of the RG-N18000-E, supporting two HCA cards

HCA-20XS

20 x 10GE optical ports (SFP, LC)
The line card must be used with the M18000E-HCA card.

HCA-4CQ

4 x 100GE optical ports (QSFP28, LC/MPO)
The line card must be used with the M18000E-HCA card.

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contacte-nos

Contacte-nos

How can we help you?

Contacte-nos

Get an Order help

Contacte-nos

Get a tech support