Picture

RG-AM5528-SF, Simplified Optical Ethernet (SOE) Master Access Point

Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.

Models

RG-AM5528-SF

Master AP, 24 x 2.5G optical ports, 24 x power ports

RG-MAP852-SF-M

Micro AP, 2.976 Gbps, 4 x downlink electrical ports

RG-MAP852-SF-S

Micro AP,1.775 Gbps, 1 x downlink electrical port

RG-AM5532

Master AP, 24 × Gigabit PoE downlink ports

RG-MAP852(V3)

Micro AP, Wi-Fi 6, 2.976 Gbps, four downlink ports

Series

Optical i-Share+ Solution i-Share+ Solution

Datasheet Sales Enquiry

Highlight Features

Connection with APs through hybrid cables, realize long distance and fast transmission
Full 2.5G downlink optical ports, fully maximizing the AP performance
Multiple AP models allowing flexible service expansion
AP remote power-on or power-off, eliminating the need for onsite operation

Key Specification
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Key Specification View More

Features

Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF

All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

Specifications

Solution

All-Optical Network

Hybrid Cable

Wi-Fi 6

i-Share Mode

Power On/Off of a Single AP

24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer Distance
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance

Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

Multiple AP Models, Facilitating Flexible Service Expansion

The optical i-Share master AP provides the i-Share mode, supports access of micro APs, and integrates wired and wireless coverage of intensive rooms such as dormitories and hotels.
It can also switch to the common mode, provide Layer 2 switching, realize on-demand access of the ordinary wall plate APs, indoor APs, and outdoor APs, facilitating flexible service expansion.

An O/E converter is required for connecting an conventional AP with copper ports to a master AP.

P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.

Specifications

Hardware Specifications

Dimensions and Weight	RG-AM5528-SF
Dimensions (W x D x H)	Main unit: 442 mm x 315 mm x 43.6 mm (17.40 in. x 12.40 in. x 1.72 in.) Shipping: 538 mm x 438 mm x 173 mm (21.18 in. x 17.24 in. x 6.81 in.)
Rack height	1 RU
Weight	Main unit: 4.6 kg (10.14 lbs) Shipping: 6.38 kg (14.06 lbs)
Mounting	Rack-mount

System Specifications	RG-AM5528-SF
Memory	1 GB DDR4
Flash memory	4 GB
Switching capacity	880 Gbps/7.92 Tbps
Packet forwarding rate	426 Mpps/600 Mpps

Port Specifications	RG-AM5528-SF
Fixed service port	Uplink: 4 x 10GE SFP+ ports that can only switch between 10GE SFP+ mode and 1GE SFP mode simultaneously. Separate mode switching is not supported. Downlink: 24 x 1GE/2.5GE SFP ports and 24 x PoE-out ports. Ports 1 to 20 support PoE/PoE+, and each port supports up to a 30 W PoE power supply. Ports 21 to 24 support PoE/PoE+/PoE++, and each port supports up to 90 W PoE power supply. The maximum PoE output power is 480 W.
Fixed management port	1 x RJ45 console port 1 x 10/100/1000BASE-T MGMT port
Status LED	24 x PoE LEDs 24 x 1000/2.5GBASE-X SFP port LEDs 4 x SFP+ port LEDs 1 x system status LED 1 x power LED 1 x MGMT port LED

Power Supply and Consumption

RG-AM5528-SF

Input power supply

One 550 W built-in power module (AC input and DC output)

● Input voltage: 176 V AC to 240 V AC

Frequency: 50 Hz to 60 Hz

Rated input current: 4 A

● Output voltage: 12 V DC for the master AP and 54 V DC for the external unit

Maximum power consumption

Maximum power consumption: 530 W

Without load: < 42 W

With full load: < 530 W

Environment and Reliability	RG-AM5528-SF
Temperature	Operating temperature: 0ºC to 45ºC (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude in the range of 1,800–5,000 m (5,905.51–16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Altitude	Operating altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Humidity	Operating humidity: 10% RH to 90% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing)
Surge protection	AC power connector ● Differential mode: ± 6 kV ● Common mode: ± 6 kV Hybrid cable connector ● Differential mode: ± 2 kV ● Common mode: ± 6 kV
Fan	Fan speed adjustment Fan fault alarm
Shock and vibration	GB/T 2423
Environmental standard	Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995
Mean Time Between Failure (MTBF)	69.23 years at the operating temperature of 25°C (77°F)

Software Specifications	RG-AM5528-SF
Basic Function
Applicable software version	RGOS12.5(4)B0404P1 or later
Security and Authentication
ACL	IPv6 ACL Time range-based ACL Egress ACL based on a Layer 2 physical interface or aggregate interface Ingress ACL based on a Layer 2 physical interface or aggregate interface Egress ACL based on a Layer 3 interface Ingress ACL based on a Layer 3 interface
CPP	CPU Protect Policy (CPP)
NFPP	Network Foundation Protection Policy (NFPP)
Routing and Switching
MAC	MAC address learning and aging Static and dynamic MAC addresses Source MAC address filtering Limitation on the number of MAC addresses learned on an interface
Ethernet	Jumbo frame length: 1,518 bytes IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)
VLAN	Interface-based VLAN assignment Maximum number of SVIs: 1,000 Maximum number of VLANs: 4,094 VLAN ID range: 1 to 4,094
ARP	ARP entry aging, gratuitous ARP learning, and proxy ARP Maximum number of ARP entries: 24,000 ARP check
IPv4 services	Static and dynamic IPv4 addresses DHCP server and DHCP client DHCP snooping DNS client and DNS proxy NTP server, NTP client, and SNTP client
IPv6 services	Static and dynamic IPv6 addresses. Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, and IPv6 ping DNSv6 client NTPv6 server and NTPv6 client
IP routing	IPv4/IPv6 static routing Maximum number of static IPv4 routes: 1,000 Maximum number of static IPv6 routes: 1,000 Static black hole routing
Multicast	Multicast-to-unicast conversion IGMP snooping
Network Management and Monitoring
Network management	SNMPv1/v2c/v3 Fault detection and alarm
Network management platform	Web management (Eweb)
User access management	Console, Telnet, SSH, TFTP client, TFTP server, FTP server ,and FTP client

Regulatory Compliance	RG-AM5528-SF
Regulatory compliance	EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, ETSI EN 300 386, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Installation

Installation Guide

Software and Configuration

Software

Order Information

Model	Description
RG-AM5528-SF	All-optical i-Share+ master AP for Ruijie SOE Solution 24 x downlink 1G/2.5G SFP ports and 24 x PoE/PoE+ power supply ports. Four power supply ports support PoE/PoE/PoE++ power supply. 4 x uplink 10G SFP+ ports, low noise, and power supply included In i-Share mode, each master AP occupies eight wireless controller licenses.
RG-MAP852-SF-S	Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie SOE Solution 1 x SFP port 1 x 10/100/1000Base-T Ethernet port with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 1.775 Gbps per device BOB structure One 1G optical module of the master AP
RG-MAP852-SF-M	Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie SOE Solution 1 x 2.5G SFP port 4 x10/100/1000Base-T Ethernet ports with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 2.976 Gbps per device Support for Bluetooth Wall-mounted, ceiling-mounted, and junction box-mounted One 2.5G optical module for the micro AP and one 2.5G optical module for the master AP are delivered with this AP.
RG-HybridP	The hybrid pigtails for Ruijie SOE Solution incorporates optical fibers and copper wires. One end is the LC interface and DC connector.
RG-HybridBox	The hybrid box for Ruijie SOE Solution supports input of 24 hybrid pigtails and output of 24 hybrid cables, which is used to connect the hybrid pigtails to the hybrid cables.
RG-OEHC-SM-1B6A2-2x0.5-I-305	Indoor single-core 2 × 0.5 mm² hybrid cable, single roll, with a length of 305 m
RG-OEHC-SM-1B6A2-2x1.0-I-305	Indoor single-core 2 × 1.0 mm² hybrid cable, single roll, with a length of 305 m
RG-OEHC-SM-2B6A2-2x1.5-O-1000	Outdoor dual-core 2 x 1.5 mm² hybrid cable, single roll, with a length of 1000 m

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

RG-AM5528-SF, Simplified Optical Ethernet (SOE) Master Access Point

Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF

All-optical architecture, point-to-point power supply for APs through hybrid cablesHigh-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

Specifications

Solution

All-Optical Network

Hybrid Cable

Wi-Fi 6

i-Share Mode

Power On/Off of a Single AP

24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cablesOnly one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer DistanceThe connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster TransmissionThe transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power SupplyThe master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance

Full 2.5G downlink optical ports, allowing high-speed transmission of APsBreaking the bottleneck of wired networks and providing better wireless experience for growing service needs

Multiple AP Models, Facilitating Flexible Service Expansion

P2P Power Supply Control and Remote Power-on/Power-off,Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.

Hardware Specifications

Software Specifications

2024 Ruijie Networks Brand Awareness Survey

All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer Distance
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.