Compare Products


Clear All



RG-AP880-AR, Wi-Fi 6 Quad-Radio 8.642 Gbps High-Density Indoor Access Point, 5Gbps Combo SFP Port

Indoor high-density scenarios in the higher education, government, general education, finance, and business sectors

Highlight Features
  • 5G optical port and 5G electrical port for flexible networking
  • Upgraded to Wi-Fi 6, a combined data rate of up to 8.642 Gbps
  • Al radio for intelligent guidance of STA roaming, ensuring service continuity
  • Independent Al Radio for security protection, delivering better experiences and higher security
  • Unified WIS cloud management, intelligent O&M
Sales Enquiry

Wi-Fi 6 High-Density Indoor AR Series AP

Maximum Data Rate
All-Optical i-Share+
Independent AI Radio
10 Spatial Streams
Bluetooth 5.1

5G Optical Port and 5G Electrical
Port for Flexible Networking

One 5G optical port supports higher bandwidth. With Ruijie All-Optical i-Share+ Solution, this port helps achieve all-optical gigabit access in rooms.
One 5G electrical port is also provided to meet existing networking requirements.

Upgraded to Wi-Fi 6
Achieving a Combined Data Rate of Up to 8.642 Gbps

High Concurrency

OFDMA and MU-MIMO are introduced to
ensure stable access of multiple STAs

Low Latency

OFDMA is applied to transmit data to
multiple STAs simultaneously. The
latency is as low as 20 ms.

High Security

The next-generation wireless encryption
protocol WPA3 greatly improves the
security of wireless connection.

High Speed

With 1024-QAM modulation, the
data transmission rate is 25%
higher than 802.11ac.

Al Radio for Intelligent Guidance of STA
Roaming, Ensuring Service Continuity

The built-in Al Radio independently scans STA status, and reports the scanning result of neighbor APs to ACs. The ACs then guide STAs to quickly access an AP with better signals.
In this way, STAs can maintain a good signal quality during movement, thereby achieving low latency, no lagging, and service continuity in roaming.

Traditional Settled AP
Average roaming latency: 300ms
Packet loss rate: 2%
Average roaming latency: < 30ms
Packet loss rate: < 0.5%

Independent AI Radio for Secure Scanning
Safeguarding Wireless Network Security

Different from traditional, periodic, single-radio scanning with blind spots, AI Radio performs independent, real-time, full-radio, secure scanning.
The secure scanning does not occupy communication radio resources or affect wireless performance, ensuring good network experiences.

AI Radio
Traditional AP
24/7 real-time scanning
5G/2.4G full-radio scanning
Secure scanning
Data transmission

Independent AI Radio for Secure
Scanning, Safeguarding
Wireless Network Security

Different from traditional, periodic, single-radio scanning with
blind spots, AI Radio performs independent, real-time, full-radio,
secure scanning.
The secure scanning does not occupy communication radio
resources or affect wireless performance, ensuring good
network experiences.

AI Radio
Traditional AP

Unified Cloud Management
Intelligent Tuning and Easier O&M

WIS Cloud Network enables network-wide configuration and tuning, removing the need of onsite commissioning.
It also supports O&M on the mobile app Wi-Fi Moho.
With early warning of network faults, wireless networks can be monitored anytime and anywhere.

Go to WIS ->

Cloud O&M

24h Network Optimization

Real-Time Warning

Fault Locating


Hardware Specifications

Dimensions and Weight


Physical Dimensions

(W × D × H)

230 mm × 230 mm × 51 mm


Main unit: 1.0 kg

Bracket: 0.1 kg



Lock Option

Kensington lock and security latch


Radio Specifications


Radio Design

Quad-radio design, including one AI radio that can switch between the 2.4 GHz and 5 GHz frequency bands.

Up to 10 patial streams;

Radio1: 2.4 GHz: 2 spatial streams, 2 × 2 MIMO

Radio 2: 5 GHz: 2 spatial streams, 2 × 2 MU-MIMO

Radio 3: 5 GHz: 4 spatial streams, 4 × 4 MU-MIMO

Radio 4: 2.4 GHz/5 GHz: 2 spatial streams, 2 × 2 MU-MIMO

Operating Frequencies

IEEE 802.11b/g/n/ax: 2.4 GHz to 2.4835 GHz

IEEE 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.725 GHz to 5.850 GHz

 (Note: The operating band varies in different countries.)

Data Rate

Radio 1: 2.4 GHz, 575 Mbps

Radio 2: 5 GHz, 2.4 Gbps

Radio 3: 5 GHz, 4.8 Gbps

Radio 4: 2.4 GHz/5 GHz, 300 Mbps/867 Mbps

Maximum wireless rate of the AP:

2.4 GHz + 5 GHz + 5 GHz + 2.4 GHz, 8.075 Gbps

2.4 GHz + 5 GHz + 5 GHz + 5 GHz, 8.642 Gbps

Antenna Type

Built-in smart antenna

Antenna Gain

2.4 GHz: 3 dBi

5 GHz: 3 dBi

Max. Transmit Power

20 dBm

(Note: The transmit power varies based on the regulations in different countries and regions.)

Power Adjustment

Configurable in increments of 1 dBm


802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM



IEEE 802.11b: –96 dBm (1 Mbps), –93 dBm (5 Mbps), –89 dBm (11 Mbps)

IEEE 802.11a/g: –91 dBm (6 Mbps), –85 dBm (24 Mbps), –80 dBm (36 Mbps), –74 dBm (54 Mbps)

IEEE 802.11n: –90 dBm@MCS0, –70 dBm@MCS7, –89 dBm@MCS8, –68 dBm@MCS15

IEEE 802.11ac: HT20: –88 dBm (MCS0), –63 dBm (MCS9)

IEEE 802.11ac: HT40: –85 dBm (MCS0), –60 dBm (MCS9)

IEEE 802.11ac: HT80: –82 dBm (MCS0), –57 dBm (MCS9)

IEEE 802.11ax: HE80: –82 dBm (MCS0), –57 dBm (MCS9), –52 dBm (MCS11)

IEEE 802.11ax: HE160: –79 dBm (MCS0), –53 dBm (MCS9), –50 dBm (MCS11)





Bluetooth 5.1

USB Port

USB 3.0

Fixed Service Port

One 100/1000/2500/5000Base-T Ethernet port with auto-neogitiation, IEEE 802.3af/802.3at/802.3bt-compliant

One 5GE SFP port, compatible with 1GE and 2.5GE SFP modules

One 10/100/1000Base-T Ethernet port with auto-neogitiation, supplying power to IoT modules (48 V/12.95 W)

Fixed Management Port

One RJ45 console port

Status LED

One system status LED


One reset button


Power Supply and Consumption


Input Power Requirements

DC input: 54 V/1.1 A

PoE/PoE+/PoE++ (IEEE 802.3af/at/bt-compliant)


If IEEE 802.3at-compliant PoE is adopted, the AP can be normally powered on, but AI Radio is disabled, and the downlink port and USB port cannot supply power to external devices.

Power Supply to External Device

Supported, supplying power to IoT modules through the PoE-capable Ethernet port

Max. Power Consumption

40 W


Environment and Reliability



Operating temperature: –10°C to +50°C (14°F to 122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

At a height between 3000 m (9842.52 ft.) to 5000 m (16404.20 ft.) above the sea level, every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).


Operating humidity: 5%RH to 95%RH (non-condensing)

Storage humidity: 5%RH to 95%RH (non-condensing)

Safety Standard

GB 4943.1, IEC 62368-1

EMC Standard

EN300386, GB19286, GB17618


Software Specifications


WLAN Functions

Maximum number of connected STAs: 1552

SSID hiding

Separate authentication mode, encryption mechanism, and VLAN attributes for each SSID

Remote Intelligent Perception Technology (RIPT)

Intelligent terminal recognition technology

Intelligent load balancing based on terminal quantity or traffic

STA limit

●     SSID-based STA limit

●     Radio card-based STA limit

Bandwidth limit: STA/SSID/AP-based rate limit

Fat/Fit mode switching:

●     When the device works in fit mode, it can be switched to fat mode via an AC.

●     When the device works in fat mode, it can be switched to fit mode through the local console port or Telnet mode.


PSK and web authentication

Data encryption: WEP (64/128-bit), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3

WeChat-based authentication

QR code-based visitor authentication

SM-based authentication

MAB authentication

Data frame filtering: whitelist, static blacklist, dynamic blacklist

User isolation

Rogue AP detection and containment

Dynamic ACL assignment

Remote authentication dial in user service (RADIUS)

CPU Protect Policy (CPP)

Network Foundation Protection Policy (NFPP)

Routing Switching

IPv4 features: static IPv4 address and dynamic IPv4 address obtained via DHCP

Multicast-to-unicast conversion

PPPoE client



Management and Maintenance

Network management via Telnet or TFTP

Web-based management

Wireless positioning: RBIS

Wireless marketing: WMC/MCP

Fault detection and alarm

Information statistics and logs

Show More
Resources All Resources
Learn about Products or Solutions
Software and Configuration
Order Information





IEEE 802.11ax-compliant quad-radio wireless AP for indoor high-density scenarios. The device supports a maximum of 10 spatial streams and a maximum wireless rate of 8.642 Gbps. It can work in IEEE 802.11a/b/g/n/ac and IEEE 802.11ax modes, switch between fit mode and fat mode, and support IEEE 802.3bt/at/af-compliant PoE


Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details



How can we help you?


Get an Order help


Get a tech support